View EASV3020GRA2_8981790.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

smd ? b EASV3020GRA2 features ? package in 8mm t ape on 7 diameter r eel. ? compatibl e wi th automatic pl acement equipment. ? compatibl e wi th infr ared an d vapor p hase reflow solder proc ess. ? multi-color type. ? pb -free. ? the produ c t its elf will r emain within rohs c ompliant version. ? compliance with eu reach ?compliance halogen free .(br <900 ppm ,cl <900 ppm , br+cl < 1500 ppm). description ?the easv3020 smd led is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ?besides, lightweight makes them ideal for miniature applications. etc. applications ? back-lighting in dashboard and switch. ?t elecommunication: indicator and back-lighting in telephone and fax. ? flat back-light for lcd, switch and symbol. ?general use. page 1 of 12 rev. 0.01
device selection guide code chip materials emitted color resin color s 2 algainp brill iant orange water clear g6 algainp brilliant yellow green ) parameter symbol code rating unit reverse voltage v r 5 v forward current i f s 2 25 ma g6 25 p eak forward current (duty 1/10 @1khz) i fp s 2 60 ma g6 60 power dissipation pd s 2 60 mw g6 60 electrostatic discharge esd hbm s 2 2000 v g6 2000 operating temperature t opr - 40 ~ +85 storage temperature tstg - 40 ~ + 90 soldering temperature tsol reflow soldering : 260 for 1 0 sec. hand solde ring : 350 for 3 sec. datasheet EASV3020GRA2 page 2 of 12 rev. 0.01
electro-optical characteristics (ta=25 ) parameter symbol code min. typ. max. unit condition luminous intensity iv s 2 11.5 ----- 28.5 mcd i f = 5 ma g6 9.0 ----- 22.5 viewing angle 2 1/2 ----- 120 ----- deg peak wavelength p s 2 ----- 611 ----- nm g6 ----- 575 ----- dominant wavelength d s 2 600.5 ----- 6 12.5 nm g6 56 7 .5 ----- 57 5.5 spectrum radiation bandwidth s 2 ----- 17 ----- nm g6 ----- 20 ----- forward voltage v f s 2 1.7 2.0 2.4 v g6 1 .7 2.0 2.4 reverse current i r s 2 ----- ----- 10 a v r =5v g6 ----- ----- 10 note: 1. tolerance of luminous intensity: 11% 2.tolerance of dominant wavelength 1nm 3. tolerance of forward voltage: 0.1v datasheet EASV3020GRA2 page 3 of 12 rev. 0.01
s2 bin range of luminous intensity bin cod e min. max. unit condition l 11.5 18.0 mcd i f = 5 ma m 18.0 28.5 bin code min. max. unit condition 1 9.0 14.5 mcd i f = 5 ma 2 14.5 2 2 .5 bin code min. max. unit condition d8 600.5 603.5 nm i f = 5 ma d9 603.5 606.5 d10 606.5 609.5 d11 609.5 612.5 bin code min. max. unit condition c15 567.5 569.5 nm i f = 5 ma c16 569.5 571.5 c17 571.5 573.5 c18 573.5 575.5 note: 1.tolerance of luminous intensity: 11% 2.tolerance of dominant wavelength 1nm datasheet EASV3020GRA2 page 4 of 12 rev. 0.01
typical electro-optical characteristics curves s2 datasheet EASV3020GRA2 page 5 of 12 rev. 0.01
typical electro-optical characteristics curves g6 datasheet EASV3020GRA2 page 6 of 12 rev. 0.01
package dimension note: tolerances unless mentioned 0.1mm. unit = mm datasheet EASV3020GRA2 page 7 of 12 rev. 0.01
moisture resistant packing materials label explanation ? cpn: customer s product number ? p/n: product number ? qty: packing quantity ? cat: luminous intensity rank ? hue: chromaticity coordinates & dom. wavelength rank ? ref: forward voltage rank ? lot no: lot number note: the tolerances unless mentioned is 0.1mm ,unit = mm datasheet EASV3020GRA2 page 8 of 12 rev. 0.01
carrier tape dimensions: loaded quantity 2000 pcs per reel note: the tolerances unless mentioned is 0.1mm ,unit = mm moisture resistant packaging label desiccant label aluminum moisture-proof bag datasheet EASV3020GRA2 page 9 of 12 rev. 0.01
precautions for use 1. over-current-proof customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package: the leds should be kept at 30 or l ess and 90%rh or less. 2.3 after opening the package: the led's floor life is 1 year under 30 or less and 6 0% rh or less. if unused leds remain, it should be stored in moisture proof packages. 2. 4 if the moisture absorbent material (silica gel) has faded away or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment : 60 5 for 24 hours. 3. soldering condition 3.1 pb -free solder temperature profile 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during heating. 3.4 after soldering, do not warp the circuit board. 4.soldering iron each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful because the damage of the product is often started at the time of the hand solder. 5.repairing repair should not be done after the leds have been soldered. when repairing is unavoidable, a double-head soldering iron should be used (as below figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing. datasheet EASV3020GRA2 page 10 of 12 rev. 0.01
application restrictions high reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. if you have any concerns, please contact everlight before using this product in your application. this specification guarantees the quality and performance of the product as an individual component. do not use this product beyond the specification described in this document. datasheet EASV3020GRA2 page 11 of 12 rev. 0.01
disclaimer 1. everlight reserves the right(s) on the adjustment of product material mix for the specification. 2. the p roduct meet s everlight published specification for a period of twelve (12 ) months from date of shipment. 3. the graphs shown in this datasheet are representing typical data only and do not show guaranteed values. 4. when using this product, please observe the absolute maximum ratings and the instructions for us ing outlined in these specification sheets. everlight assumes no responsibility for any damage resulting from the use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 5. these specification sheets include materia ls protected under copyright of everlight. reproduction in any form is prohibited without obtaining everlight s prior consent . 6. this product is not intended to be used for military, aircraft, automotive, medical, life sustaining or life saving applications or any other application which can result in human injury or death. please contact authorized everlight sales agent for special application request. datasheet EASV3020GRA2 page 12 of 12 rev. 0.01

▲Up To Search▲

Price & Availability of EASV3020GRA2

	To Download EASV3020GRA2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .